3/V150H Central Heating Controller Battery

Type: Nickel Metal Hydride. Voltage: 3.6 V. Capacity: 150 mAh.

Height: 15 mm. Width: 17 mm. Depth: 26.5 mm.

Price: £9.99. Postage and packing included.

Construction: 3 x V150H Ni-MH cells in green plastic casing.

Replaces: 3V150H, 3V/150H, 3V100R, 3V100DK0, 3V100DKO, 3V150P, 3V110R, 3/110R.

Comments:
The oval shaped 3/V150H Central Heating Controller Battery is widely used in Honeywell and Potterton timer units such as the EP2000, EP2001, EP2002, EP3002 and EP6000.

The PCB version with pins is also deployed on PC motherboards and other electronic devices.

This oval shaped 3/V150H Central Heating Controller Battery is suitable for most Honeywell ST699B (Honeywell ST699) central heating programmer (but take a look before ordering as some recent models feature a soldered-in lithium cell which can be found by clicking here).

Our oval shaped 3/V150H Central Heating Controller Battery replaces the Varta 3/V150H and earlier versions such as the 3/V100DKO or 3/V100DK0.

This 3/V150H Central Heating Controller Battery is covered in a thick green plastic casing. It can happily replace batteries encased in shrink wrap, and those with thick plastic casings that, variously, come in green, blue or beige colours.

Visit here if you need the version of this cell with solder pins.

This battery is not suitable for the Danfoss Randall 922 or Randall 911 central heating controller. You will need this 1/V150H cell.