R/C Model Battery Auto Cut-off Quick Battery Charger

Name: HPC72. 

Type: Auto Cut-off Quick NiMH/NiCd Battery Charger. 

Input Voltage: 230-240V 50Hz. Output Voltage: 7.2V - 9.6V.

Length: 84 mm. Width: 62 mm. Depth: 50 mm. (excluding three pin plug).

Output: 600 mA, 6.72 VA(max). Weight: 464 g.

Connector: Tamiya JST. 

Price: £13.75 each. Postage and packing included.

Comments:
This charger is designed to be used with a wide variety of power packs for remote control R/C models.

This charger is particularly suited to 7.2V packs such as six cell 7.2 / 1800 mAh powerpacks and 9.6V packs such as the eight cell 9.6V / 800 mAh  battery.

The charger automatically detects the output voltage for charging 6 to 8 cell battery packs.

This charger fast-charges your NiMH or NiCd battery pack and then automatically switches to trickle charge when charging is complete (using Delta V) or after 6 hours so that batteries can be safely left to charge without the risk of overcharging. You can even leave them overnight. Several automatic safety features such as short-circuit protection, over heating perotection and reverse polarity detection are included.

The charger is fitted with a Tamiya style plug and has an LED indicator to show when charging is complete.

When using this charger, remember that NiMH and NiCd batteries will reach their peak performance after three or four charge-discharge cycles. NiCd batteries should be discharged fully before re-charging.